Swing28Pro

Positional Analytics: 80+ Indicators, Ready-Made Setups and Candle Patterns

An end-of-day scanner with prepared strategy presets — golden cross, volume breakout, oversold bounce, VWAP bounce and more — plus every technical column you would want to verify them.

Ready-made setups do the filtering; the indicator columns let you check the scanner's reasoning instead of trusting it blindly.

The tool opens inside your BreakPoint account. If you are not signed in yet you will be asked to sign in first, and access depends on your active plan.

priceEMA (average)

What is Analytics — Positional?

Analytics — Positional is an end-of-day scanner built around named setups. Instead of assembling filters yourself, you pick a preset that describes a recognisable condition — strong trend momentum, an EMA golden cross, a volume breakout, an oversold bounce, a bullish consolidation, a trend reversal — and the scanner returns the stocks currently matching it.

Each result then carries the technical columns behind that classification: price, RSI, VWAP, relative strength, whether price sits above the 20, 50 and 200-period averages, ADX trend, volume trend, MACD trend, consolidation status, the nearest resistance and support levels, and any candle pattern that has just formed.

That combination is what makes it a learning tool as much as a screening one. You see the setup, and immediately beside it the evidence for why the stock qualified, so you can judge whether it is a strong example or a marginal one.

Good to know

Presets describe conditions, not quality. Two stocks can both match a golden cross while one is a textbook example and the other barely qualifies — which is exactly why the indicator columns are shown.

Why use this tool?

Positional trading gives you time to think. This tool is built for using it.

Who it is for

Positional traders

Screen once, hold for weeks, and use the indicator columns to decide when the reason for holding has expired.

Swing traders

Presets like volume breakout and VWAP bounce translate directly into shorter-horizon setups.

Learners

Seeing many examples of the same setup side by side is the fastest way to develop a feel for what a good one looks like.

Systematic traders

The same preset every week produces comparable results you can actually evaluate over time.

Key benefits

Named setups

A dozen prepared conditions covering trend, reversal, breakout and consolidation ideas.

Full evidence shown

Every indicator behind the classification is visible, so nothing is a black box.

Levels included

Support and resistance references come with each row, which is where stops and targets belong.

Candle pattern filters

Narrow to engulfing, doji, hammer, marubozu or star formations when timing an entry.

Multi-average view

Position against the 20, 50 and 200-period averages shows short, medium and long-term trend in one row.

End-of-day workflow

Runs on completed sessions, which suits anyone who cannot watch markets during the day.

Interface walkthrough

Choose a preset, optionally add a pattern filter, then read the table.

BreakPoint — Analytics (Positional)12345
  1. 1Preset selector — Strong trend momentum, oversold bounce, EMA golden cross, volume breakout, MACD crossover, VWAP bounce, trend reversals, consistent uptrend, bullish consolidation, bearish breakdown.
  2. 2Candle pattern filter — All patterns, or narrow to bullish, bearish, doji, engulfing, hammer and shooting star, marubozu or star formations.
  3. 3Results table — Symbol and price with RSI, VWAP, relative strength, EMA positions, ADX, volume and MACD trends.
  4. 4Levels columns — Nearest resistance above and support below — the practical inputs for target and stop-loss.
  5. 5Consolidation & pattern — Whether the stock is currently in a tight range, and the candle pattern it has just printed.

On mobile

The preset row scrolls horizontally and the results table scrolls sideways with the symbol column anchored, so the workflow survives on a phone.

How to use Analytics — Positional

Run it weekly, or after the close on any day you plan to add positions.

STEP 1
Pick one preset
STEP 2
Check the trend columns first
STEP 3
Verify strength with ADX
STEP 4
Use RSI for timing, not direction
STEP 5
Add a pattern filter if timing an entry
STEP 6
Read the level columns
STEP 7
Write the plan
  1. Pick one preset

    Choose the setup that matches the market environment. Oversold bounce and trend momentum suit very different conditions, and running both at once produces a list you cannot interpret.

  2. Check the trend columns first

    Look at where price sits relative to the 20, 50 and 200-period averages. All three aligned is a genuine trend; a mixed picture means the setup is fighting a longer-term direction.

  3. Verify strength with ADX

    A strong ADX supports trend and breakout presets. If it is weak, breakouts from that list are more likely to stall.

  4. Use RSI for timing, not direction

    A mid-range RSI in a rising trend is usually a more comfortable entry than a very high one, which often means waiting for a pause is better.

  5. Add a pattern filter if timing an entry

    An engulfing or hammer pattern at the end of a pullback is a classic entry cue and narrows the list quickly.

  6. Read the level columns

    Measure the distance to resistance against the distance to support. If that ratio is unattractive, skip the stock however good the setup looks.

  7. Write the plan

    Entry, stop just beyond support, target near resistance, and a position size that makes the loss acceptable if you are wrong.

Understanding every field

Every column, translated.

FieldWhat it tells youHow to use it
Symbol / PriceThe stock and its latest price.The reference point for turning percentage risk into an actual quantity.
RSIHow stretched the recent move is, on a 0–100 scale.Timing, not direction. Very high readings suggest waiting; mid-range in an uptrend is usually comfortable.
VWAPThe volume-weighted average traded price.Price above it means buyers have been in control; a bounce from it is a common continuation entry.
RS 55Relative strength against the broader market over a longer window.Prefer stocks outperforming the index — they hold up better when the market wobbles.
EMA 20 / 50 / 200Whether price is above each average.Above all three, in order, is the cleanest trend condition available in a single glance.
ADX TrendHow strongly the stock is trending, regardless of direction.Strong readings favour trend setups; weak ones warn that breakouts will likely fail.
Volume TrendWhether activity is expanding or contracting.Breakouts need expanding volume; consolidations should show it contracting before the move.
MACD TrendWhether momentum is building or fading.A confirmation column — it should agree with the preset, not contradict it.
ConsolidationWhether the stock is in a tight range.Tight ranges precede moves and allow the tightest stops. A favourite condition for patient entries.
Resistance / SupportThe nearest levels above and below.Your target and stop-loss references. Check the ratio between them before committing.
PatternsThe candle formation just printed.Entry timing. A reversal pattern at support is more useful than the same pattern in the middle of a range.

Reading the signals

The main preset families and what each is designed to catch.

Trend momentum & consistent uptrend — Stocks already travelling in one direction with strength behind them. The bread-and-butter positional setups.
Golden cross & volume breakout — Medium-term trend turning up, or price clearing a level on expanding volume. Best taken early.
VWAP bounce & oversold bounce — Entries into an existing trend after a dip. Tighter stops, but they need the larger trend to still be intact.
Bullish consolidation — A tight range after an advance. The most patient setup and often the most rewarding, because the stop can sit very close.

A worked example

Separating a strong golden cross from a weak one

The EMA golden cross preset returns two stocks. Stock A trades above all three averages, ADX shows a strong trend, volume is expanding, relative strength is positive and support sits 4% below with resistance 12% above. Stock B is above the 20 and 50 but below the 200, ADX is weak, volume is contracting and resistance sits 3% overhead.

A EMAsAbove all 3
A ADXStrong
A risk : reward≈ 1 : 3
B EMAsBelow 200
B ADXWeak
B room3% to resistance

How to read it

Both technically match the preset. Stock A has a genuine trend on every timeframe, strength to support it, and three times as much room to resistance as risk to support. Stock B is a short-term bounce inside a longer-term downtrend with a ceiling immediately overhead and no strength behind it. The preset found both; the columns tell you only one is worth trading.

The takeaway

This is the entire argument for showing the indicator columns rather than just a list of names.

Best practices

Presets save time. They do not replace judgement.

✅ Do this

  • Match the preset to the market environment rather than to your mood.
  • Require agreement between the preset and the trend columns.
  • Check the risk-reward from the support and resistance columns before every entry.
  • Use candle patterns for timing once you have already chosen the stock.
  • Keep a record of which presets work for you in which conditions.

⛔ Avoid this

  • Do not run several presets and cherry-pick the names you already liked.
  • Do not buy an oversold bounce in a stock below its long-term average and call it a trend trade.
  • Do not rely on a single indicator column; they are meant to be read together.
  • Do not ignore volume — most failed breakouts show contracting volume in hindsight.
  • Do not hold a positional trade past the level that invalidated it because the indicators "still look fine".
The most common mistake

Indicator stacking. Adding more conditions until only two stocks remain feels rigorous but usually just selects for rarity rather than quality. Two or three conditions that genuinely agree beat eight that were tuned until the list looked comfortable.

Frequently asked questions

Holding positions for weeks to months, based on daily or weekly charts. It requires fewer decisions than intraday or swing trading and tolerates deeper pullbacks in exchange for larger overall moves.

Jargon used on this page, explained

Every technical term above, written for someone who has never traded before.

Positional Trading

Holding for weeks to months.

Positional trading rides the larger trend and accepts deeper pullbacks along the way. It requires the fewest decisions and the most patience, and it lives on daily and weekly charts rather than minute-by-minute action.

EMA (Exponential Moving Average)

A running average of price that reacts faster to recent moves.

Imagine plotting the average closing price of the last 20 days and joining the dots. That line smooths out daily noise so you can see the underlying direction. An EMA does the same thing but gives more weight to the most recent days, so it turns faster than a plain average. Price above a rising EMA is the simplest definition of an uptrend; price below a falling EMA is the simplest definition of a downtrend.

priceEMA (average)

EMA 20 / 50 / 200

Short, medium and long-term trend lines.

The number is how many sessions the average covers. EMA 20 describes the last month of trading, EMA 50 the last quarter, EMA 200 roughly the last year. When price sits above all three and they are stacked in order, short above medium above long, the stock is in a healthy trend on every timeframe at once. That stacking is what most swing traders mean by "the trend is clean".

priceEMA (average)

RSI (Relative Strength Index)

A 0–100 speedometer for how stretched a move is.

RSI compares the size of recent gains to recent losses and squeezes the answer into a 0–100 scale. Above 70 means the stock has risen quickly and may pause; below 30 means it has fallen quickly and may bounce. The common beginner mistake is treating 70 as an automatic sell. In a strong trend a stock can stay above 70 for weeks. Use it to judge timing, not direction.

70 — overbought30 — oversold

MACD

A momentum tool built from two moving averages.

MACD measures the gap between a fast and a slow moving average. When the gap widens the move is accelerating; when it narrows the move is losing steam. A "crossover" is the moment that gap flips sign, which traders read as momentum changing hands from sellers to buyers or the other way round.

ADX

A strength meter that says how trending the market is.

ADX does not tell you the direction, only the conviction. Low readings, roughly under 20, describe a sideways chop where breakouts tend to fail. Higher readings, roughly above 25, describe a market that is genuinely travelling in one direction. Pairing direction from a trend tool with strength from ADX filters out a lot of false starts.

VWAP (Volume Weighted Average Price)

The average price everyone actually paid today.

VWAP averages every trade of the day but weights each one by how many shares changed hands. It answers a simple question: is the current price above or below what the average buyer paid today? Above VWAP, buyers who entered earlier are in profit and tend to defend the level. Below it, they are underwater and tend to sell into strength. Intraday traders use it as the day's fair-value line.

VWAP — the day's average traded pricebelow = sellers in control · above = buyers in control

Relative Strength (RS)

How a stock is performing compared to the index.

A stock can rise 1% on a day the index rises 2% — it went up, but it lagged. Relative strength measures that comparison directly. Rising relative strength means money is choosing this stock over the broader market, which is exactly what you want in a swing position, especially when the index itself is flat or falling.

the stockthe index

Candlestick

A bar showing open, high, low and close for one period.

The thick body spans the open and close; the thin wicks show how far price travelled and was rejected. A long lower wick means sellers pushed price down and buyers took it all back — often more informative than the closing price alone.

Support & Resistance

Price levels where buyers or sellers repeatedly show up.

Support is a level where falling prices have previously found buyers; resistance is where rising prices have previously found sellers. They are not exact lines, they are areas. Their value is practical: they give you an objective place to put a stop-loss and a realistic first target.

resistance — sellers appearsupport — buyers appear

Risk-Reward Ratio

How much you stand to make versus what you risk.

If your stop is 3% away and your target is 9%, the ratio is 1:3. A trader can be wrong more often than right and still finish ahead when the ratio is favourable. Checking it before entry is the single fastest way to filter out mediocre setups.

Looking for a term that is not here? The full trading glossary covers every concept used across these guides.